---
title: "Toyota Tundra / Sequoia Dash AC Air Vent Louver Tab"
slug: "toyota-tundra-air-vent-louver-tab-55670-0c010"
oem_part_number: "55670-0C010"
superseded_numbers:
  - "55670-0C020"
  - "55680-0C010"
  - "55660-0C010"
compatible_vehicles_and_appliances:
  - make: "Toyota"
    model: "Tundra"
    year_start: 2000
    year_end: 2006
  - make: "Toyota"
    model: "Sequoia"
    year_start: 2001
    year_end: 2007
material: "Automotive ASA"
price_cents: 1400
price_formatted: "$14.00 USD"
is_commercial_allowed: true
license: "CC BY 4.0"
download_stl_url: "https://barebones3d.com/assets/stl/toyota-tundra-air-vent-louver-tab-55670-0c010.stl"
checkout_api_url: "https://barebones3d.com/api/checkout/create"
canonical_guide_url: "https://barebones3d.com/guides/toyota-tundra-air-vent-louver-tab-55670-0c010"
---

# Toyota Tundra / Sequoia Dash AC Air Vent Louver Tab (OEM #55670-0C010)

## Technical Specifications
- **Primary OEM Part #:** `55670-0C010`
- **Engineering Material:** Automotive ASA (100% solid infill, calibrated printer compensation)
- **Repair Difficulty:** Easy
- **Estimated Repair Time:** 15 mins
- **Commercial Purchase:** $14.00 USD (Printed on-demand in 48h via Slant 3D)
- **Direct STL Download:** [55670-0C010.stl](https://barebones3d.com/assets/stl/toyota-tundra-air-vent-louver-tab-55670-0c010.stl)

## Required Tools & Supplies
- **Nylon Dash Pry Tool**: Bezel perimeter release
- **Needle-Nose Pliers**: Remove broken rear linkage pin

## Step-by-Step Installation Procedure
### Step 1: Protect Dash and Pry Vent Bezel

Apply painter tape along the dashboard perimeter to protect the soft vinyl. Insert a nylon pry tool at the 3 o clock position and pop the retaining spring tabs outward.

![Original broken plastic Toyota Tundra / Sequoia Dash AC Air Vent Louver Tab (OEM #55670-0C010) shown side-by-side with reinforced 3D printed Automotive ASA reproduction.](https://barebones3d.com/assets/parts/55670-0c010-toyota-tundra-air-vent-louver-tab-55670-0c010-step-1.webp)

### Step 2: Extract Broken Linkage Remnants

Fish out the broken OEM plastic fingers from inside the horizontal vent slat. Use needle-nose pliers to make sure the internal vertical sync-bar is unblocked.

![Original broken plastic Toyota Tundra / Sequoia Dash AC Air Vent Louver Tab (OEM #55670-0C010) shown side-by-side with reinforced 3D printed Automotive ASA reproduction.](https://barebones3d.com/assets/parts/55670-0c010-toyota-tundra-air-vent-louver-tab-55670-0c010-step-2.webp)

### Step 3: Slide New ASA Tab Over Center Slat

Position the front grip tab over the central horizontal vane, then press the rear fork into the vertical sync rod until it snaps firmly into the retention notch.

> **Pro Tip:** ASA provides exceptional UV and thermal stability under direct sun-baked windshield environments.

![Original broken plastic Toyota Tundra / Sequoia Dash AC Air Vent Louver Tab (OEM #55670-0C010) shown side-by-side with reinforced 3D printed Automotive ASA reproduction.](https://barebones3d.com/assets/parts/55670-0c010-toyota-tundra-air-vent-louver-tab-55670-0c010-step-3.webp)

## Frequently Asked Questions
#### Q: Does Toyota sell this tab separately?
**A:** No. Toyota dealerships only sell the entire dashboard register assembly (OEM #55670-0C010) which retails for upwards of $260.00.

#### Q: Will this melt in the hot summer sun?
**A:** No. It is printed in ASA (Acrylonitrile Styrene Acrylate), which withstands temperatures up to 100°C without sagging and contains built-in UV stabilizers.

## Open-Source Attribution & Safety Disclaimer
Model by OverlandHardware3D under CC BY 4.0.
Original Source: https://www.printables.com/model/toyota-tundra-vent-tab-repair

> **Legal Disclaimer:** Barebones 3D, L.L.C. is an independent engineering firm. This replacement component is an aftermarket reproduction designed for personal repair, restoration, and life-extension. Barebones 3D is not affiliated with, authorized by, sponsored by, or endorsed by the original equipment manufacturer. All trademarks and OEM part numbers are referenced solely for identification and compatibility purposes.